The drivers provided on this page are for TSX C USB 485 (COM1), and most of them are for Windows operating system. Before downloading the driver, please confirm the version number of the operating system installed on the computer where the driver will be installed. If the system version number does not meet the driver requirements, it may cause some unexpected problems. In the case of determining the operating system version number, it is recommended to download the 5-star driver first.
In addition, as long as your downloaded driver version can make the system work normally and stably, you don't have to excessively pursue the latest version of the driver. This is because the new version of the driver is to solve some BUGs in extreme cases, or to improve a little bit of hardware performance, but it may also bring some new unpredictable problems.
Many hardware names are usually named after the chip model, and each chip model has its own dedicated driver, so as long as you know the chip model used by the hardware, you can find the right driver. For example, if your graphics card is named: "AMD Radeon RX 580", while actually the core chip model used is: "Radeon RX 580", then enter "Radeon RX 580" or "RX 580" to find the driver.
If you have a laptop or an all-in-one PC, you can also use the product name to search, and then go to the download page which has all the drivers for this machine (including: graphics card, network card, sound card, etc.). For example, if your laptop product name is: "Dell A6-9220e Inspiron Flagship", then type "Dell A6-9220e" to find all the drivers for this laptop.
Human Machine Interfaces (HMI) make your automation, data monitoring, and networking easy with our user-friendly HMIs and IIoT ready edge-devices. Our free configuration software and award-winning customer service give you the power and flexibility to streamline your automation processes.
It has been tested to work with the TSXCUSB485 USB cable and the TSXPCX1031 RS232 cable.The RS232 cable is easier to work with as it does not require an additional driver like the USB cable does.
If the USB cable is NOT showing up correctly you may need an update Unitelway driver as it also contains the windows driver for the USB cable (Check for updates if it suddenly stops working, I will also try to post new drivers on the front of this blog).
The XIP driver is used to transfer program via ethernet to premium PLCs with an ethernet port onboard (For example TSX P573623A)This method is MUCH FASTER than via the serial cable.This step is OPTIONAL if you do not intend to program via an ethernet cable, you can skip this part.However, a valid ethernet configuration must already be on the PLC, meaning you cannot program an empty card with this method, for that you must still use the serial cable.Personally, I have a small program with just a hardware configuration that contains just an ethernet setup and nothing else.I download this to the PLC via the serial cable, and when the download is complete and the ethernet module is initialized, I download the large program via the ethernet cable.
Hello JavierThe guide is slightly outdated, there are new drivers that make it possible to use both the serial/usb cable and the XIP driver in windows 10:If you do not have access to the tscautomate.com website, the unitelway driver can be found here: øm.com/wp-content/uploads/2019/02/Unitelway_driver_7_2_2019-.zipand the XIP driver can be found here: øm.com/wp-content/uploads/2019/02/XIP-driver_7_2_2019.zip
I tried installing a more recent XIP driver, and the option disappeared from PL7.I then uninstalled the newer XIP driver from the drivers manager and rebooted.After that I tried to install XIP-driver_7_2_2019.zip again, and it was present in PL7 again.
Hmm, I can't think of an abundance of troubleshooting to go through since the installation is brand new and you don't even have the Nvidia drivers up yet. I think the best place to start will be to try another kernel.
Using config 'video-nvidia-390xx-dkms' for device: 0000:01:00.0 (0300:10de:104a) Display controller nVidia Corporation GF119 [GeForce GT 610]Installing video-nvidia-390xx-dkms...Sourcing /etc/mhwd-x86_64.confHas lib32 support: trueSourcing /var/lib/mhwd/db/pci/graphic_drivers/nvidia-390xx-dkms/MHWDCONFIGProcessing classid: 0300Sourcing /var/lib/mhwd/scripts/include/0300Processing classid: 0302:: Synchronizing package databases...garuda downloading...core downloading...extra downloading...community downloading...multilib downloading...chaotic-aur downloading...error: target not found: nvidia-390xx-utilserror: target not found: nvidia-390xx-settingserror: target not found: opencl-nvidia-390xxerror: target not found: nvidia-390xx-dkmserror: target not found: nvidia-390xx-dkmsError: pacman failed!Error: script failed! 2b1af7f3a8