ARCSOFT TOTALMEDIA 3.5 ACTIVATION CODEl __LINK__
Click Here ===== https://tiurll.com/2tcGQ6
HelloThis issue that appears every time i start the device and i don't know how to solve it. I have tried to use the SD Card Tool(1000) and this Epson as a Mass Storage Device. This is the info i have on the SD Card Device:SD Card Device(M1):Logic Driver: M-FlashDriver Speed: Full SpeedVendorID: A4TechDevice@site: Mass StorageDeviceType: MemoryCardManufacturer: Epson#1Product Model: SD Card Model: SD Card Rev: 0000Serial Number: 001BA1P030001024 (1SX1LI005744)Revision Code: NoneHardware revision: 3.00C behind temp factor: 0x00, extended state = 0x00, bad blocks = 0x00A of 20 blocks. Resulted in: 0x00015c after quitting the device. Probably a problem with the controller, but first, i tried the 1000 tool and the Mass Storage Device and it failed, despite my settings that i believe are correct. I would like to download this Epson controller bundle 1.0.02 firmware. how can i do that?Thanks if anyone can help me.Name: Mass Storage Device (USB2.0)Logic Driver: M: VID&PID: Vid_14cd&Pid_125cSpeed: high speedVendorID: MassProductID: Storage DeviceProduct Revision: Vendor Description: GenericProduct Description: Mass Storage DeviceSerial Number: 125C20100726Epson OneStep 800DCR-1 is one of the best Epson driver i've found on the net with USB Mass Storage Device. Device Status: (Extended State) 0x00, Temp: 0x00, Bad Blocks: 0x00A of 20 blocks.Resulting in: 0x00015c after quitting the device.First, install the driver to usb device, it can find it, install it and restart your computer. try again. If the result is the same then if you haven't changed the mass storage device type while install the driver, try to change it to "Epson OneStep 800DCR-1"I take a look on it. if something's i can help about you mail me your contact number or your e-mail. best regards, marassa d2c66b5586